- Applicable to all workpieces with a medium material thickness or thicker.
- Maximum search speed of 360 cm/min.
- Value-priced touch position sensor.
- Excellent touch- sensing choice for workpieces whose surfaces contain rust non-conductive scale.
- Built-in controller eliminates additional mounting consideration.
- High voltage type touch sensors are also available.
SENSORS & CAMERAS
You are here:
OTC DAIHEN SENSORS
For smarter, real-time automation
Boost your productivity with tactile and optical sensors that provide live feedback and enable dynamic process control.
To accelerate and fine-tune your production, OTC DAIHEN offers a range of advanced sensors. These devices detect and react to changes in weld bead position, part alignment, and other critical parameters.
With fast data processing, our sensors enable real-time adjustments, ensuring stable and accurate results. Easy integration into your system allows for seamless upgrades without interrupting existing workflows.
TOUCH SENSOR FD-WD
Workpiece position detection sensor
Overview
Specifications
Features
Documents and media
Overview
Specifications
- Workpiece position sensing: O (5 seconds detection rate per location (requires straight section without bending))
- Welding line copy: /
- Weld joint profile detection: /
- Supported sensor combinations: This sensor can be used together with an arc sensor or TIG arc sensor
- Suitable workpieces: Plate thickness 3.2 mm and greather
- Workpiece material: Energizes entire workpiece, including surface
Features
Documents and media
Workpiece position detection sensor by touching the welding wire.
Find all information and documents in Resource Center.
ARC SENSOR FD-AR
Tracking sensor for CO₂/MAG welding
Overview
Specifications
Features
Documents and media
Overview
Automatic seam tracking by weaving.
- Weld tracking correction works on curved seams and in cases where heat distortion is dynamically moving the weld seam.
- Applicable to workpieces with medium thickness or greater.
- Eliminates issues with workpiece interference and service access that result from mounting of peripheral equipment around the welding torch.
- Easy to use from the viewpoints of interference of workpieces and maintenance.
- Can´t be used for tracking on aluminum.
Specifications
- Workpiece position sensing: /
- Welding line copy: O
- Weld joint profile detection:/
- Supported sensor combinations: Usable in combination with a touch or laser sensor
- Suitable workpieces: Plate thickness 3.2 mm and greater
- Workpiece material: Iron and stainless steel
Features
Documents and media
Find all information and documents in Resource Center.
LASER SENSOR FD-QD
High accuracy workpiece position detection with laser precision
Overview
Specifications
Features
Documents and media
Overview
- Faster and more accurate than touch sensor.
- Allows high accuracy detection for a wide spectrum of applications from thing plate to medium thickness plate.
- Can be used for applications other than welding.
- Allows users to visually confirm the recognition result while using a teach pendent.
- Enables automatic change of the welding condition based on the recognition result.
- Allows recognition of various welding joints with easy operation.
Specifications
- Workpiece position sensing: O (1.5 s is the 2-way displacement detection rate for 1 position).
- Welding line copy: /
- Weld joint profile detection: O
- Supported sensor combinations: Usable in combination with a touch sensor, Arc or TIG arc sensor with search speeds of 100cm or less.
- Suitable workpieces: Plate thickness 1.0mm and greater
- Workpiece material: Nonmetals are acceptable, but the surface can´t be glossy.
Features
Documents and media
Find all information and documents in Resource Center.
LASER TRACKING SENSOR FD-QTS
Automatically adjusts the torch position during welding
Overview
Specifications
Features
Documents and media
Overview
Compact, wider field of view
Improved welding quality
- During welding, torch position, angle and welding conditions can be adjusted automatically based on the detected welding position and gap, to prevent faulty welding.
Ultra-high speed tracking
- Tracking speed up to 1000cm/min!
- It can be used for tracking high-speed welding such as laser hybrid welding.
Easy teaching
- All operations can be performed from a teaching pendant. A PC is not required.
Specifications
- Robots can be combined: FD-V8/V8L/V25/A20/B6/B6L/H5/V6S/V6LS
- Controllers can be combined: FD19
- Number of available combinations: 1 set of this sensor per a robot, and 2 sets of this sensor per robot controller
- Applicable torch: RT3500H, RT5000H, RZ3510H, RTW5000H, RZW5000H
- Laser light source: Red visible laser diode / Class 3B Laser Product
- Outside dimension(W×D×H): 115×41×69 mm (Excluding the protrusion)
- Weight: About 0.5 kg
- Cooling method: Forced-air cooling with dry air (optional water-cooling block available)
- Maximum tracking speed: 1000 cm/min
- Tracking accuracy: ±0.4mm
Features
Documents and media
Find all information and documents in Resource Center.
2D VISION SENSOR FUNCTION
Easy connection with vision sensor, easy setting
Overview
Specifications
Features
Documents and media
Overview
Plug- and- play connection for simple installation.
Simple to connect
- Simplified integration via plug-and-play functionality.
Simple teaching
- Teaching new applications is simplified via dedicated commands.
Built for shop floor applications
- Variety of camera-mounting options supporting a variety of guidance requirements.
Specifications
- Compatible models: Almega All Friendly Series models
- Number of units that can be combined: Each robot controller supports 4 cameras via 1 controller
Features
Documents and media
Find all information and documents in Resource Center.
Whether you’re a technology enthusiast, a business owner seeking automation
solutions, or simply intrigued by the incredible possibilities of robotics, our
complete list of robots is your gateway to a world of limitless potential.
