• High speed welding at thin stainless steel sheets
• Unique viewing of the welding seams through OTC aluminium- welding characteristics
• High speed-pulse mode
• Increased gap bridge-ability
• LOW SPATTER: Maximum spatter reduction for the whole current range: reduction of the spatter up to 80%

• Main voltage (± 15%)  3 x 400 V / 50 Hz Actual power output max  18,2 kVA
• Welding current  30–400 A
• Welding voltage  12–34 V
• Welding current / Duty cycle  50% 400 A (10 min / 40°C)
• 100% 370 A (10 min / 40°C)
• Safety class / Cooling system  IP 23 / F
• Switching steps  infinitely variable Wire feeder  4-roll
• Wire feed speed  1,5–22 m/min
• Welding wire diameter  0,8–1,6 mm
• Dimensions L x B x H  1090 x 654 x 1448 mm Weight  149 kg

• Smart Pulse
• Low-Slag Wire mode
• Faster calibration
• Medium sheet aluminum welding
• Smart integrated LCD Panel
• Increased melting rate
• Straight polarity wire
• Multi-Function Remote Control
• New welding characteristics for stainless steel

CBT-EX (Low Spatter process)                         

Maximum spatter reduction, thanks to the new welding current control CBT-EX (Controlled Bridge Transfer)                           

The new CBT-EX current control system achieves maximum spray reduction, not only in the low current, but also in the entire current range                      

Penetration Control                           

Ideal seam geometry with safe root detection                            

The penetration control keeps the weld penetriation constant, even if the free wire end varies.   

Wave Pulse                          

Extended frequency range (0.5–32 Hz) by the AC/DC wave pulse function                          

The new wave pulse function regulary regulates the welding current and the wire feed speed control, and it also controls the weld pool.                     

Standard Pulse                    

Stable and concentrated electric arc for both high-speed applications and root welding                 

Highest performance for welding steel, stainless steel and aluminium with 1 Pulse & Drop Control                             

MMA                    

E-Hand welding, stable arc for optimal welding results             

Find all information and documents in Resource Center.